A centralized EO Sterilization Machine will operate in the same temperature range, but the set point can be adjusted. A low temperature will result in a longer exposure time and a higher one will allow the evaporation of the ozone. The cycle will not begin unless the chamber is sealed. A dual gasket system ensures a tight seal. Regardless of the temperature setting, an EO Sterilization Machine will maintain lethality within the product it is sterilizing.
Depending on the machine you choose, the process will take anywhere from three to eight hours. The temperature range is set to a level that is appropriate for the materials being sterilized. Then the machine will perform five to six sterilization stages. The last stage of the cycle is aeration, where the ethylene oxide residue is removed from the load. Once all parts are sterilized, steam is introduced into the chamber and the temperature rises.
Another type of sterilization machine is called an EO Sterilization machine. It consists of a tank that contains 100% of ethylene oxide. The chamber is kept at a precise temperature and pressure so that the evaporation phase does not exceed the exposure time. The negative pressure ensures that no gas can escape from the chamber, even if power is lost. This machine is a special request and is available at a reasonable price.
The EO Sterilization machine is a convenient way to sterilize medical devices, and is an ideal option for small businesses. Its flexible design and multiple modules allow it to be configured to meet a wide variety of needs. An EO Sterilization machine is highly efficient and is highly customizable. If you have a need for sterilization, you can contact a professional sterilization service.
This type of machine is more efficient and provides greater sterilization efficiency. It does not involve excessive heat. The temperature ranges from a lower to a higher level. A comprehensive EO sterilization machine will allow you to choose the best EO concentration for your needs. Whether you are looking for a single door or a double, an ozone sterilization machine is a great choice. When you choose an ozone sterilization plant, you should also consider the cost of the project and the experience required to run it.
The EO Sterilization machine is a specialty sterilizer for medical devices. The temperature must be between 50 and 60 degrees to be effective. It can be used for a variety of different types of medical devices, including electronic equipment. The EO gas produced by the machine will also be compatible with medical oxygen. Moreover, it will not affect human tissue. When a hospital-grade EO Sterilization machine is properly calibrated, it will achieve a satisfactory sterility level.
